 |
|
 |
| |
The breaking kits come directly from our experience in the racing field. It is probably more preferable to obtain a completed kit rather than buying the parts apart from each other. This way, it is assured that the parts (breaking surface, carrier etc.) match, and no problems are experienced. The kit also includes the necessary durits. It is not necessary to change the master cylinder if it is still in good shape. |
| Brakes Kits Supermoto/Monobike |
|
Brakes Kits Superbike/Enduro |
Version
2 :
• steel/stainless floating disc with a diameter of 300 or 320 mm,
• Caliper with 4 forged pistons (4*32 mm) black,
• Aluminum bracket to place the caliper on its original fork,
• durit stainless braided,
• all necessary screws and bolts.
Version 3 :
• steel/stainless floating disc with a diameter of 300 or 320 mm
• Caliper with 4 forged opposed pistons (2*34 + 2*30),
• Aluminum bracket to place the caliper on its original fork,
• durit stainless braided,
• all necessary screws and bolts.
Option :
• radial master cylinder (PR16) reference 10476080
• Anodization in different colors available for some of the parts (bracket, carrier, calipers): blue, red, purple, black, and other “basic” colors |
|
Composition
:
• two steel/stainless floating discs with a diameter of 300, 310, or 320 mm,
• Two Brembo calipers with 4 machined pistons P4 34/30 (2*30 + 2*34) Brembo,
• Two Brembo aluminum brackets to place the caliper on its original fork,
• durit stainless braided,
• all necessary screws and bolts.
Option :
• radial master cylinde
(PR19) ref. 10476060 with or without contactor stop
• Anodization in different colors available for some of the parts (bracket, carrier, calipers): blue, red, purple, black, and other “basic” colors |
Brakes Kits Quad |
|
Brakes OVERSIZED Kits |
New Quad Kits are currently being developed. Don’t hesitate to contact us to find out if there is a kit available for your quad !
YAMAHA Banshee (1989):
• steel/stainless floating disc with a diameter of 240 mm,
• Caliper with 2 forged pistons P05
• Aluminum bracket to place the caliper on its original fork,
• durit stainless braided,
• all necessary screws and bolts.
SUZUKI LT500R :
• steel/stainless floating disc with a diameter of 280 mm,
• Caliper with 4 forged opposed pistons
• Aluminum bracket to place the caliper on its original fork,
• durit stainless braided,
• all necessary screws and bolts.
Option :
• radial master cylinder (PR16) reference 10476080
• Anodization in different colors available for some of the parts (bracket, carrier, calipers): blue, red, purple, black, and other “basic” colors. |
|
The oversized kits have been developed to adapt to discs with a diameter of more than 320 mm on motorbikes of the Supermotard category.
• steel/stainless floating disc with a diameter of 320 mm
• Aluminum bracket to place the caliper on its original fork,
• all necessary screws and bolts.
|
|
|
|
